Frequency Menu
The options in the Frequency menu represent the frequency of the electrical current in fluorescent
lighting sources in your locale. If your camera is set to a frequency that does not match your country‟s
electric current, you may see flickering or waves on the images taken by your camera.
50Hz – UK, Europe and Australia
60Hz – US, Canada and South America
1) Press the MENU button to open the menus for the current mode.
2) Press the LEFT or RIGHT button to scroll and select the „Frequency‟ menu.
3) Press the UP or DOWN button to highlight the desired menu selection.
4) Press the SET button to confirm and select the highlighted menu option.
5) A selected option icon will appear on the selected item.
6) Press the LEFT or RIGHT button to select the next menu item.
7) Press the MODE button to exit the menu and return to your previous mode.
8) Remember that this setting will be saved by your camera until you manually change the setting or
restore the camera‟s default factory settings.
TV Out Menu
TV Out allows you to select the TV option appropriate for you to view your captured images on your
television. See “Connecting the Digital Video Camera to the HDTV” for further information on how to
connect your digital video camera to your television.
NTSC – television and video standard used in America, Canada
PAL – television and video standard used in Europe
1) Press the MENU button to open the menus for the current mode.
2) Press the LEFT or RIGHT button to scroll and select the „TV Out‟ menu.
3) Press the UP or DOWN button to highlight the desired menu selection.
4) Press the SET button to confirm and select the highlighted menu option.
5) A selected option icon will appear on the selected item.
6) Press the LEFT or RIGHT button to select the next menu item.
7) Press the MODE button to exit the menu and return to your previous mode.
To Next Page
Loading...
