8) Remember that this setting will be saved by your camera until you manually change the setting or
restore the camera‟s default factory settings.
Format Memory Card Menu
You can use the Format Memory Card menu to delete all of the content that is currently on your
camera‟s memory card.
Keep in mind that formatting the memory card will permanently delete all of the content on
your camera‟s memory card.
This option will delete all of the content at one time. If you would like to delete individual images, use
the delete menu in the camera‟s Playback mode.
1) Press the MENU button to open the menus for the current mode.
2) Press the LEFT or RIGHT button to scroll and select the „Format Memory Card‟ menu.
3) Press the UP or DOWN button to highlight the desired menu selection.
4) To exit without formatting the card, select „Cancel‟ and press the SET button.
5) To proceed with the format, select „Yes‟ and press the SET button.
You will be asked to confirm the formatting of the memory card.
Select „No‟ to exit without formatting.
Select „Yes‟ and press the SET button to begin.
The memory card will be completely formatted.
Firmware (Factory Default Settings) Menu
Use this menu to view the Firmware version on your camera or to reset your camera settings to the
Factory Default Settings.
1) Press the MENU button to open the menus for the current mode.
2) Press the LEFT or RIGHT button to scroll and select the „Firmware‟ menu.
3) The „Restore Factory Settings‟ is selected.
4) Press the SET button to reset the camera to the factory default settings.
5) You will be asked to confirm the resetting to the factory default settings.
Select „No‟ and press the SET button to exit the menu and return to the previous mode without
To Next Page
Loading...