8
- Push the SD card until you hear a slight clicking sound. This indicates the SD card
has been inserted correctly. See images below: 3 and 4.
Note:
After the camera is powered on, the SD icon will appear on the LCD display. If you
do not see the SD icon on the display, please check if the card was inserted
properly.
Make sure the SD card is not locked (check the lock switch on the side of the SD card).
If the SD card is locked this will prevent the camera from saving captured photos to the
SD card.
3. POWER ON THE CAMERA:
Flip open the LCD screen and press the POWER button , located on the inside wall,
to turn on the digital camcorder.
To Next Page
Loading...
