EasyManua.ls Logo

Vivitek D560ST - User Manual

Vivitek D560ST
65 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Copyright
This publication, including all photographs, illustrations and software, is protected under international
copyright laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may
be reproduced without written consent of the author.
© Copyright 2012
Disclaimer
The information in this document is subject to change without notice. The manufacturer makes no
representations or warranties with respect to the contents hereof and specifically disclaims any implied
warranties of merchantability or fitness for any particular purpose. The manufacturer reserves the right to
revise this publication and to make changes from time to time in the content hereof without obligation of
the manufacturer to notify any person of such revision or changes.
Trademark Recognition
Kensington is a U.S. registered trademark of ACCO Brand Corporation with issued registrations and
pending applications in other countries throughout the world.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC in the United States and other countries.
All other prod
uct names used in this manual are the properties of their respective owners and are
acknowledged.
i

Questions and Answers

  • J
    james85Aug 13, 2025
    What to do if there is no light from Vivitek Projector?
    • J
      Joseph BerryAug 13, 2025
      If there is no light from the Vivitek projector, check the following: * Ensure the power cable is securely connected. * Verify the power source is functioning by testing it with another electrical device. * Restart the projector and confirm the Power LED is blue. * If the lamp was recently replaced, reset the lamp connections. * Replace the lamp module. * If these steps don't work, put the old lamp back in and have the projector serviced.
  • A
    Adrian SavageAug 17, 2025
    What to do if Vivitek D560ST Projector does not respond to the remote control?
    • L
      Laura GarciaAug 17, 2025
      If the Vivitek projector does not respond to the remote control, try these steps: 1. Make sure to point the remote control directly at the remote sensor on the projector. 2. Ensure there are no obstructions between the remote and the sensor. 3. Turn off any fluorescent lights in the room. 4. Check the battery polarity and replace the battery if needed. 5. Turn off other Infrared-enabled devices nearby. 6. If the issue continues, have the remote control serviced.
  • J
    johnsonsuzanneAug 20, 2025
    How to fix no image on Vivitek D560ST?
    • F
      feliciaclarkAug 21, 2025
      If no image appears on the Vivitek projector screen, verify the settings on your notebook or desktop PC. If that doesn't resolve the issue, turn off all equipment and power it up again in the correct order.
  • D
    Diana CostaAug 25, 2025
    How to correct trapezoid effect on Vivitek D560ST Projector?
    • A
      Amy BishopAug 25, 2025
      If the image is wider at the top or bottom (trapezoid effect) on your Vivitek projector, position the projector so it is as perpendicular to the screen as possible. You can also use the Keystone button on the remote control to correct the problem.
  • T
    Teresa JimenezAug 28, 2025
    What to do if the sound is distorted on Vivitek D560ST Projector?
    • M
      Mrs. Stephanie Atkins MDAug 28, 2025
      If the sound from the Vivitek projector is distorted, check the audio cable connection and test the source audio output with other speakers. If the problem continues, have the projector serviced.
  • B
    Barbara CooleyAug 31, 2025
    How to fix streaked image on Vivitek D560ST?
    • D
      Dominique SmithAug 31, 2025
      If the image from the Vivitek projector is streaked, set the Frequency and Tracking settings on the Image->Computer menu of the OSD to the default settings. To ensure the problem is not caused by a connected PC’s video card, connect to another computer.
  • B
    Barbara KimSep 4, 2025
    How to reverse image on Vivitek D560ST Projector?
    • S
      Sandra RichardsonSep 4, 2025
      If the image from the Vivitek projector is reversed, check the Projection setting on the Settings 1 menu of the OSD.
  • C
    Carol ReyesSep 8, 2025
    How to adjust contrast on Vivitek D560ST?
    • S
      Samantha HancockSep 8, 2025
      If the image from the Vivitek projector is flat with no contrast, adjust the Contrast setting on the Image menu of the OSD.

Vivitek D560ST Specifications

General IconGeneral
Brightness3000 ANSI Lumens
Lamp Life (Eco Mode)10000 hours
Weight2.2 kg
Speaker2W
Projection TechnologyDLP
Projection Size30" to 300"
Native Resolution1280 x 800 (WXGA)
Max. Supported Resolution1920 x 1200
Lamp Life (Normal Mode)5, 000 hours
I/O PortsHDMI, VGA, USB, Audio Out

Related product manuals