To Next Page
A
Anna PittsAug 15, 2025
What to do if my Vivitek D516 shows a lamp error?
- KkhamiltonAug 15, 2025
If your Vivitek Projector shows a 'Lamp error', disconnect the AC power cord, wait one minute, and then restart the projector.
What to do if my Vivitek D516 shows a lamp error?
If your Vivitek Projector shows a 'Lamp error', disconnect the AC power cord, wait one minute, and then restart the projector.
What to do if my Vivitek Projector is overheating?
If your Vivitek Projector displays an 'Over temperature' error, disconnect the AC power cord. Wait for one minute before restarting the projector.
What to do if Vivitek D516 says lamp door is open?
If the Vivitek Projector indicates 'Lamp door open', disconnect the AC power cord, wait one minute, and then restart the projector.
What to do if my Vivitek Projector has a color wheel error?
If your Vivitek Projector is showing a 'Color wheel error', disconnect the AC power cord, allow one minute to pass, and then restart the projector.
What to do if my Vivitek D516 Projector shows a DMD error?
If your Vivitek Projector displays a 'DMD error', disconnect the AC power cord. Wait one minute, and then restart the projector.
What to do if my Vivitek Projector shows thermal break status error?
If your Vivitek Projector shows a 'Thermal break status error', disconnect the AC power cord, wait one minute, and then restart the projector.
What to do if my Vivitek Projector shows Fan1 error?
If your Vivitek Projector reports a 'Fan1 error', disconnect the AC power cord, wait for one minute, and then restart the projector.
What to do if my Vivitek Projector shows Fan2 error?
If your Vivitek Projector reports a 'Fan2 error', disconnect the AC power cord, wait for one minute, and then restart the projector.
What to do if my Vivitek Projector shows Fan3 error?
If your Vivitek Projector reports a 'Fan3 error', disconnect the AC power cord, wait for one minute before restarting the projector.
Provides essential safety guidelines for projector operation.
Details proper placement, tilt, and clearance for installation.
Guidelines for safe use of the power cord and remote batteries.
Instructions and warnings related to lamp replacement.
Procedures for cleaning the projector and its components.
Details the OSD buttons and status indicator LEDs on the projector top.
Identifies all input and output connectors on the projector's rear.
Procedures for powering the projector on and off safely.
How to set up a security lock to prevent unauthorized use.
Guide to leveling and angling the projector for optimal display.
Instructions for adjusting image size, sharpness, and trapezoid effect.
Resets all projector settings to factory defaults.
Detailed procedure for safely replacing the projector lamp.
How to reset the lamp hour counter after replacement.
General tips for diagnosing and resolving common projector issues.
Explains error codes indicated by projector LEDs.
Solutions for issues related to the projector lamp not working.
Troubleshooting steps for common image display issues.
Steps to resolve issues with the remote control.
Technical details and features of the projector models.
General
