K
kevin13Jul 27, 2025
What to do if Vivitek D5500 Projector lamp life is over?
- JjohnbraunJul 27, 2025
When the lamp life of your Vivitek Projector is over, you should replace it.
To Next PageTo Next PageWhat to do if Vivitek D5500 Projector lamp life is over?
When the lamp life of your Vivitek Projector is over, you should replace it.
General| Display Technology | DLP |
|---|---|
| Native Resolution | XGA (1024 x 768) |
| Contrast Ratio | 2000:1 |
| I/O Ports | HDMI, VGA, USB, RS-232, Audio In/Out |
| Projection Size | 30" to 300" |
| Input Connectors | HDMI, VGA, Composite Video |
Safety guidelines for disassembly and assembly procedures.
Safety considerations related to the projector lamp.
Safety warning regarding the projector lens.
Optical and physical performance details of the projector.
Electrical characteristics and power requirements.
Identification of projector parts, top features, and controls.
Identification and description of input/output terminals.
Remote control parts, battery installation, block diagrams, and wire location.
Basic operational checks for troubleshooting.
Procedure for checking the main board and its voltages.
Interpretation of projector status based on LED lights.
Steps to remove the lamp cover, module, and holder.
Procedures for removing top, back, front covers, and shields.
Instructions for removing and replacing main, IO, audio, and protection boards.
Procedures for replacing color wheel, fan, optical, and lens shift modules.
Guide on how to enter the projector's service mode.
Steps to calibrate VGA input at 1024x768 resolution.
Procedure to calibrate YUV input signals.
Steps to calibrate video input signals.
Procedure to adjust the color wheel index.
Step-by-step guide to adjust projector focus.
Guide to locking the projector and setting a keyword.
Steps to unlock the projector if it is locked.
Information on security reset procedures.
Identification and function of fuses within the projector.
Description of thermostat locations and function for temperature protection.
Description of bimetal locations and function for temperature protection.
Function of the lamp interlock switch for safety.
Instructions for cleaning the projector's cabinet and lens.
Guide for cleaning and maintaining projector filters.
Detailed cleaning procedures for optical components and main unit.
Guidance on replacing consumable parts like lamps.
Procedure to reset the lamp hours counter after lamp replacement.
Supported display modes and projector throw distance data.
List of projector spare parts and their identifiers.
Visual references for spare parts.
Table indicating adjustments needed after replacing specific parts.
