Vivo DESK-V000V Series User Manual

Cable Replacement Kit for DESK-V000V Series
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-v000v
help@vivo-us.com www.vivo-us.com 1-800-371-5654
SKU: DESK-V000V

Vivo DESK-V000V Series Specifications

General

Brand	Vivo
Model	DESK-V000V Series
Category	Tools
Language	English

Summary

Safety and Warnings

General Warning

Read directions carefully; improper installation may cause damage or serious injury.

Choking Hazard Warning

Small parts are not for children under 3 years; adult supervision is required.

Assembly Preparation

Package Contents

Lists all included items for the cable replacement kit.

Tools Needed

Identifies the necessary tools for assembly, such as scissors and a screwdriver.

Assembly Steps

Step 1: Remove Original Handle Screws

Use the Allen wrench to remove the three M5x12 screws securing the original handle.

Step 2: Remove Cable Clamp Screw

Unscrew the 3/8" screw that secures the cable clamp to the desktop.

Step 3: Loosen Cable Nuts

Loosen the nuts holding the cable to the gas spring using the provided wrenches.

Step 4: Remove Cable

Lift the cable out of its slots as illustrated.

Step 5: Install New Handle

Install the new handle by reversing the previous steps, repeating for the opposite side.

Contact and Support

Customer Support

Contact for damaged or defective parts to ensure a fully functioning product.

Product Information

Visit the website for more VIVO products and information.