VivoLink VLHDMIEXTDGL100 - Package List

4K Optical Fiber Extender
1
Introduction
The extender set transmits HDMI signal using a Fiber Optic cable. The extender set
supports up to 4k resolutions. It extends signals up to 2000m/300m via single mode or
multi-mode cable. To achieve the best performance, it is recommend the product be
used with OM2 or greater multimode fiber. Built-in diagnostic LEDs ensure hassle-free
and robust installations.
Package List
1x 4K Optical Fiber Extender (Tx and Rx are included)
2x Power Adapter (5V DC 1A)
1x Optical Fiber Cable (single-mode)
1x User Manual
Note: Check whether all the items listed above are included in your package. If not,
contact your dealer to make up.
Appearances
Transmitter:
2
PWR LED: Illuminate when powered up
3
LINK LED: Illuminate when connecting
Transmitter and Receiver module.
4
USB: Insert a DC 5V 1A power adapter
here.
5
OUT: Connect with IN of Receiver module.