Vivotek FD8166A-N - Page 170

VIVOTEK
170 - User's Manual
3: Good
4: Detailed
5: Excellent
100: Use the quality level in
"cbr_qpercent"
* Only available when
"ratecontrolmode"= cbr.
* Only available when
"capability_smartstream_version"="
2.0"
s<0~(m-1)>_m
jpeg_cbr_qperc
ent
1~100 4/4 Select customized quality in a
normalized full range.
1: Worst quality
100: Best quality
* Only valid when
"ratecontrolmode"= cbr and
"quant"= 100.
* Only available when
"capability_smartstream_version"="
2.0"
s<0~(m-1)>_m
jpeg_bitrate
20000~"capability_videoin_c<n>_mj
peg_maxbitrate"
4/4 The target bit rate in constant bit rate
mode.
* Only valid when
"ratecontrolmode"= cbr
s<0~(m-1)>_m
jpeg_prioritypoli
cy
framerate,imagequality 4/4 Set prioritypolicy
* Only valid when
"ratecontrolmode"= cbr
s<0~(m-1)>_m
jpeg_maxframe
1~"capability_videoin_c<n>_mjpeg_
maxframerate"
1/4 The maximum frame rates of a
mjpeg stream at different
resolutions("capability_videoin_c0_r
esolution ") are recorded in
"capability_videoin_c<n>_mjpeg_m
axframerate"
wdrpro_mode
<product
dependent>
<boolean> 4/4 Enable WDR pro
* Only available when
"capability_image_c<n>_wdrpro_m