VIVOTEK
176 - User's Manual
* Available value is
listed in
"capability_image_c
<n>_exposure_ma
xrange"
etc.
* This parameter may also restrict image
frame rate from sensor due to sensor
generates a frame per exposure time. Ex: If
this is set to 1/5s ~ 1/8000s and camera
takes 1/5s on the night, then sensor only
outputs 5 frame/s.
* Only available when
"capability_image_c<n>_exposure_maxran
ge" != "-" and
"capability_image_c<n>_exposure_rangety
pe" is "onevalue".
* We support this parameter when the
version number (httpversion) is equal or
greater than 0302a.
enableblc
<Not support anymore>
<boolean> 4/4 Enable backlight compensation.
* Not support this parameter anymore when
the version number (httpversion) is equal or
greater than 0301a.
* It's recommanded to use
"exposurewin_c<n>_mode" to switch on/off
BLC.
exposurelevel 0~12 4/4 Exposure level
"0,12": This range takes the concept from
DC's exposure tuning options. The definition
is:
0: EV -2.0
1: EV -1.7
2: EV -1.3
3: EV -1.0
4: EV -0.7
5: EV -0.3
6: EV 0
7: EV +0.3
8: EV +0.7
9: EV +1.0
10: EV +1.3
To Next Page
Loading...
