Vivotek FD8166A-N - Page 179

VIVOTEK
User's Manual - 179
0: Low <-> 100: High
* Only available when
"capability_image_c<n>_agc_maxgain" !=
"-" and
"capability_image_c<n>_exposure_rangety
pe" is "onevalue".
* Normalized range.
* We support this parameter when the
version number (httpversion) is equal or
greater than 0302a.
piris_mode
<product dependent>
manual, indoor,
outdoor,-
1/4 Control P-Iris mode.
"outdoor": Auto-setting P-Iris to get best
quality, but easy to meet rolling or flicker
effect in indoor environment.
"indoor": Avoid rolling and flicker effect
first.
"manual": Manual set P-Iris by
"piris_position".
"-": not support (only available when
"capability_image_c<0~(n-1)>_sensortype"
is "smartsensor")
* Only available when
"capability_image_c<n>_iristype"=piris
piris_position
<product dependent>
1~100 1/4 Manual set P-Iris.
1: Open <-> 100: Close
* Only valid when "piris_mode"=manual or
"capability_image_c<0~(n-1)>_sensortype"
is "smartsensor"
* Only available when
"capability_image_c<n>_iristype"=piris
irismode fixed, indoor,
outdoor
<product
dependent>
4/4 Control DC-Iris mode.
"outdoor": Auto-setting DC-Iris to get best
quality, but easy to meet rolling or flicker
effect in indoor environment.
"indoor": Avoid rolling and flicker effect
first.
"fixed": Open the iris to maximum.