Vivotek FD8166A-N - Page 225

VIVOTEK
User's Manual - 225
blackwhitemode <boolean> 0/7 Indicate whether to support automatically
switch to Black & White display during the
night mode.
* We support this parameter when the version
number (httpversion) is equal or greater than
0302a.
ircutsensitivity_type <string> 0/7 Indicate the cgi interface of
"ircutcontrol_sensitivity".
"options": the value of
"ircutcontrol_sensitivity" parameter is "low,
normal,high".
"normalize": the value of
"ircutcontrol_sensitivity" parameter is
"1~100"
"-":not support
* Only available when
"capability_daynight_c<n>_support" is 1.
* We support this parameter when the version
number (httpversion) is equal or greater than
0302a.
ircutsensitivity_supportlevel 0,
<positive integer>
0/7 The value indicate the support strength level of
ircutsensitivity.
* Only available when
"capability_daynight_c<n>_support" is 1 and
"capability_daynight_c<n>_ircutsensitivity_ty
pe" is not "-".
* We support this parameter when the version
number (httpversion) is equal or greater than
0302a.
Group: capability_videoin_c<0~(n-1)> n denotes the value of "capability_nvideoin"
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION