Vivotek FD8166A-N - Page 248

VIVOTEK
248 - User's Manual
exposure_mode" is 1.
* We support this parameter when
the version number (httpversion) is
equal or greater than 0302a.
exposure_levelrange -,
"0,12"
0/7 Available range for
"videoin_c<n>_exposurelevel"
* When "exposure_mode"=0, this
must be set to "-".
exposure_winmode auto,
custom,
blc,
-
<product dependent>
0/7 Available options for
"exposurewin_c<n>_mode"
* "-" means group: exposurewin is
not supported.
* When exposure_mode="0", this
must be set to "-".
exposure_wintype inclusive,
exclusive,
-
0/7 The supported exposure window
type.
inclusive: The image inside a window
is the target area of exposure
control.
exclusive: The image inside a
window is omitted by exposure
control.
-: Not supported.
exposure_windomain qvga, px, std, - 0/7 The domain to set an exposure
window.
qvga: a 320x240 range to represent
the whole image.
px: Locate a window in the image
with pixels.
std: A normalized 0~9999 range.
-: Not supported.
exposure_winnum 0, <Positive Integer> 0/7 Indicate the number of custom
exposure windows.
* If no " custom" is listed in
"exposure_winmode", this should be
0.
exposure_ntsc_totalrange
Alistof<PositiveInteger>
0/7 Available total range for NTSC analog