Vivotek FD8166A-N - Page 267

VIVOTEK
User's Manual - 267
7.34 ePTZ setting
Group: eptz_c<0~(n-1)> for n channel product.
(capability.eptz > 0)
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
osdzoom
<Not recommended to use
this>
<boolean> 1/4 Indicates multiple of zoom in is “on-screen
display” or not.
* Reserved for compatibility, and suggest don't
use this since [httpversion] > 0302a
* We replace "eptz_c<0~(n-1)>_osdzoom"
with "
videoin_c<0~(n-1)>_zoomratiodisplay".
smooth <boolean> 1/4 Enable the ePTZ "move smoothly" feature
tiltspeed -5 ~ 5 1/4 Tilt speed
* Only available when "capability_fisheye" is 1
1/7 Tilt speed
(It should be set by eCamCtrl.cgi rather than
by setparam.cgi.)
panspeed -5 ~ 5 1/4 Pan speed
* Only available when "capability_fisheye" is 1
1/7 Pan speed
(It should be set by eCamCtrl.cgi rather than
by setparam.cgi.)
zoomspeed -5 ~ 5 1/4 Zoom speed
* Only available when "capability_fisheye" is 1
1/7 Zoom speed
(It should be set by eCamCtrl.cgi rather than
by setparam.cgi.)
autospeed 1 ~ 5 1/4 Auto pan/patrol speed
* Only available when "capability_fisheye" is 1
1/7 Auto pan/patrol speed
(It should be set by eCamCtrl.cgi rather than
by setparam.cgi.)
rotatespeed 1 ~ 5 1/4 Rotate speed (only for Fisheye series)
* Only available when "capability_fisheye" is 1
and "capability_fisheyelocaldewarp_c<n>" is 0
Group: eptz_c<0~(n-1)>_s<0~(m-1)> for n channel product and m is the number of streams which support