Vivotek FD8166A-N - Page 308

VIVOTEK
308 - User's Manual
tsmode <positive integer> N/A Timeshift mode, the unit is second.
Ex.
stime etime length file Description
V
V X X
Play recordings between stime and etime
rtsp://10.10.1.2/mod.sdp?stime=20110312_040400.000&etim
e=2011_0312_040510.000
V X V X
Play recordings for length seconds which start from stime
rtsp://10.10.1.2/mod.sdp?stime=20110312_040400.000&leng
th=120
X V V X
Play recordings for length seconds which ends at etime
rtsp://10.10.1.2/mod.sdp?etime=20110312_040400.000&leng
th=120
X X X V
Play file file
rtsp://10.10.1.2/mod.sdp?filename=/mnt/link0/
8.27 Fisheye local dewarp camera control (capability.fisheye > 0
and capability.fisheyelocaldewarp.c0 > 0, only support in 1R
mode)
Note: This request requires camctrl privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/camctrl/fdCamCtrl.cgi?channel=<value>&stream=<value>
[&move=<value>]
– Move home, up, down, left, right
[&zoom=<value>] – Zoom wide, tele
[[&speedpan=<value>][&speedtilt=<value>][&speedzoom=<value>]] – Set speeds
[&zooming=<value>&zs=<value>] – Zoom without stopping, used for joystick
[&vx=<value>&vy=<value>&vs=<value>] – Shift without stopping, used for joystick
[&x=<value>&y=<value>&videosize=<value>&resolution=<value>&stretch=<value>] – Click on image
(Move the center of image to the coordination (x,y) based on resolution or videosize of 1O mode.)
[&return=<return page>]
Example:
http://myserver/cgi-bin/camctrl/fdCamCtrl.cgi?channel=0&stream=0&move=right
http://myserver/cgi-bin/camctrl/fdCamCtrl.cgi?channel=0&stream=0&zoom=tele
http://myserver/cgi-bin/camctrl/fdCamCtrl.cgi?channel=0&stream=0&move=top&speedtilt=-1