VIVOTEK
User's Manual - 119
A green bar indicates that even though motions have been detected, the event has not been triggered
because the image variations still fall under the preset threshold.
If you want to congure other motion detection settings for day/night/schedule mode (e.g., for a different
lighting condition), please click Profile mode to open the Motion Detection Profile Settings page as
shown below. Another three motion detection windows can be congured on this page.
Please follow the steps beolw to set up a prole:
1. Create a new motion detection window.
2. Click the Prole mode tab.
3. Select the applicable Schedule mode. Please manually enter a time range.
4. Click Save to enable the settings and click Close to exit the page.
Larger than the
min. item size
Photos or videos can be captured instantly and congured to be sent to a remote recepient (via an Email
or FTP server). For more information on how to congure an event setting, please refer to Event settings
on page 104.
To Next Page
Loading...
Need help?
General
