Vivotek FD8361L - Page 140

VIVOTEK
140 - User's Manual
autocleanup_enabled <boolean> 6/6 Enable automatic clean up method.
Expired and not locked media files will be deleted.
autocleanup_maxage <positive integer> 6/6 To specify the expired days for automatic clean up.
Group: roi_c<0~(n-1)> for n channel product, and m is the number of streams which support ROI.
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
s<0~(m-1>_home <coordinate> 6/6 ROI left-top corner coordinate.
s<0~(m-1>_size <window size> 6/6 ROI width and height. (width must be 16x and height
must be 8x)
Group: eptz_c<0~(n-1)> for n channel product.
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
osdzoom <boolean> 1/4 Indicates multiple of zoom in is “on-screen display” or not
smooth <boolean> 1/4 Indicates ePTZ is smooth or not.
tiltspeed -5 ~ 5 1/7 Tilt speed
(It should be set by eCamCtrl.cgi rather than by setparam.cgi.)
panspeed -5 ~ 5 1/7 Pan speed
(It should be set by eCamCtrl.cgi rather than by setparam.cgi.)
zoomspeed -5 ~ 5 1/7 Zoom speed
(It should be set by eCamCtrl.cgi rather than by setparam.cgi.)
autospeed 1 ~ 5 1/7 Auto pan/patrol speed
(It should be set by eCamCtrl.cgi rather than by setparam.cgi.)
Group: eptz_c<0~(n-1)>_s<0~(m-1)> for n channel product. and m is the number of streams which
support ePTZ.
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
patrolseq string[120] 1/4 The indexes of patrol points, separated by “,”
patroldwelling string[160] 1/4 The dwelling time of each patrol point, separated by “,”
i<0~19>_name string[40] 1/7 Name of ePTZ preset.
(It should be set by eCamCtrl.cgi rather than by
setparam.cgi.)
i<0~19>_pos <coordinate> 1/7 Left-top corner coordinate of the preset.
(It should be set by eCamCtrl.cgi rather than by
setparam.cgi.)