Vivotek FD8367A-V - Page 241

VIVOTEK
User's Manual - 241
scenemode_supporttype " and
"capability_image_c<n>_
scenemode_support" is 1
wbmode auto,
manual,
rbgain,
widerange,
outdoor,indoor,
sodiumauto,
-
<product dependent>
0/7 Available white balance mode.
"-" means white balance is not
supported.
iristype piris,
dciris,
-
0/7 Indicate iris type.
"piris": P-Iris
"dciris": DC-Iris
"-": No Iris control support
* Note: For some cameras, this value
may be varied depending on mounted
lens.
sensortype rawsensor,
smartsensor
0/7 Indicate sensor type.
"rawsensor": Raw sensor
"smartsensor": Smart sensor
* We support this parameter when the
version number (httpversion) is equal
or greater than 0302a.
exposure_mode 0,1 0/7 0: Non-support exposure control.
1: Support exposure control.
exposure_modetype auto,
shutterpriority,
irispriority,
manual
<product dependent>
0/7 Available mode of exposure setting.
* We support this parameter when the
version number (httpversion) is equal
or greater than 0302a.
exposure_rangetype onevalue,
twovalues
0/7 Support interface of exposure range.
"onevalue": The parameter is a
constant value.
"twovalues": Need two parameters
to indicate the exposure range.
* We support this parameter when the
version number (httpversion) is equal