Vivotek FD9366-HV - Page 333

VIVOTEK
User's Manual - 333
© 2019 VIVOTEK INC. All Right Reserved
198
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
maxretentiontime_others
_maxage
<string> 6/6
To specify the expired time for automatic
clean up, and it takes effect for all media
files except media files generated by
recording task.
Format is
“‘P[Y]Y[MM]M[DDD]DT[hh]H[mm]M[ss]S
’
, similar with ISO8601 with symbols P
Ex. P7D, it means 7 days. P1DT10H, it
means 1 days and 10 hours.
The parameter takes effect when
autocleanup_maxretentiontime_others_
enabled is enabled.
7.35 Region of Interest
Group: roi_c<0~(n-1)> for n channel product and m is the index of video stream which support ePTZ.
(capability_eptz > 0 or capability_fisheye = 1)
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
s<0~(m-1)>_home <W,H>
<product
dependent>
1/6 ROI left-top corner coordinate.* If the
minimal window size is 64x64, then the
"win_i0_home"=(0~resolution_W-64,
0~resolution_H-
64), which the resolution
is the value in current stream.
* If the stream doesn’t support ePTZ, the
permissions of this parameter must be
set as 1/7.
© 2019 VIVOTEK INC. All Right Reserved
199
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
s<0~(m-1)>_size <WxH>
<product
dependent>
1/6 ROI width and height. The width value
must be multiples of 16 and the height
value must be multiples of 8
* The minimal window size is 64x64, and
then resolution_W, resolution_H is the
value in current stream.
* If the stream doesn’t support ePTZ, the
permissions of this parameter must be
set as 1/7.
7.36 ePTZ Setting
Group: eptz_c<0~(n-1)> for n channel product. (capability_eptz > 0 or capability_fisheye = 1)
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
osdzoom
<Not recommended to
use this>
<boolean> 1/4 Indicates multiple of zoom in is
“on-screen display” or not.
* Reserved for compatibility, and suggest
don't use this since [httpversion] > 0302a
* We replace
"eptz_c<0~(n-1)>_osdzoom" with "
videoin_c<0~(n-1)>_zoomratiodisplay".
smooth <boolean> 1/4 Enable the ePTZ "move smoothly"
feature
tiltspeed -5 ~ 5 1/4 Tilt speed
* Only available when
"capability_fisheye" is 1
1/7 Tilt speed
(It should be set by eCamCtrl.cgi rather
than by setparam.cgi.)
panspeed -5 ~ 5 1/4 Pan speed
* Only available when
"capability_fisheye" is 1
1/7 Pan speed
(It should be set by eCamCtrl.cgi rather
than by setparam.cgi.)