Vivotek FD9366-HV - Page 334

VIVOTEK
334 - User's Manual
© 2019 VIVOTEK INC. All Right Reserved
200
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
zoomspeed -5 ~ 5 1/4 Zoom speed
* Only available when
"capability_fisheye" is 1
1/7 Zoom speed
(It should be set by eCamCtrl.cgi rather
than by setparam.cgi.)
autospeed 1 ~ 5 1/4 Auto pan/patrol speed
* Only available when
"capability_fisheye" is 1
1/7 Auto pan/patrol speed
(It should be set by eCamCtrl.cgi rather
than by setparam.cgi.)
rotatespeed 1 ~ 5 1/4 Rotate speed (only for Fisheye series)
* Only available when
"capability_fisheye" is 1 and
"capability_fisheyelocaldewarp_c<0~(n-1
)>" is 0
Group: eptz_c<0~(n-1)>_s<0~(m-1)> for n channel product and m is the index of video stream
which support ePTZ if capability_eptz > 0; m is the index of stream number if capability_fisheye = 1.
(capability_eptz > 0 or capability_fisheye = 1)
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
patrolseq string[120] 1/4 The patrol sequence of ePTZ. All the
patrol position indexes will be separated
by ","
patroldwelling string[160] 1/4 The dwelling time (unit: second) of each
patrol point, separated by “,”.
preset_i<0~19>_name string[40] 1/4 Name of ePTZ preset.
* Only available when
"capability_fisheye" is 1
1/7 Name of ePTZ preset.
(It should be set by ePreset.cgi rather
than by setparam.cgi.)