Vivotek FE9182-H - Page 353

VIVOTEK
User's Manual - 353
8.35 Get wireless signal strength (capability_network_wireless >
0)
Note: This request requires Administrator privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/admin/getwlsignalstrength.cgi
PARAMETER VALUE DESCRIPTION
N/A N/A Get wireless signal strength.
8.36 WPS transaction (capability_network_wireless > 0)
Note: This request requires Administrator privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/admin/start_wps.cgi
PARAMETER VALUE DESCRIPTION
N/A N/A Start WPS transaction.
8.37 Washer control
(capability_peripheral_c<0~(n-1)>_washer_support > 0)
Note: This request requires Administrator privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/admin/washerctrl.cgi?<parameter>=<value>
PARAMETER VALUE DESCRIPTION
setstatus on Enable the functionality of washer, it shall refer to
"camclean_c<0~(n-1)>_washer_dwelltime" and
"camclean_c<0~(n-1)>_washer_mode" parameters.
off Disable the functionality of washer.