VIVOTEK
62 - User's Manual
The methodology of using the Resize Buttons at the upper left corner of the streaming
window is the same as that on the home page.
Focus window:
By default, the optimal focus is found on a full view window. You may designate a custom window
within your current eld of view to acquire the best focus out of it. However, you can not place a
focus window on a distant background, e.g., a hall way that stretches away for 3 meters or farther.
Doing so you will not benet from the Focus window function.
■
Full view: The focus tuning takes place by referring to the full view.
■
Custom: You can create a focus window and drag it to a place of interest in your view window.
Note that it is recommended to use this function only when you have a solid object in your view
window that is showing a consistent color or texture. This function will not take effect if you set
the focus window on a distant background.
5. Wait for the scan to complete. After a short while, the clearest image obtained should be
displayed and the optimal focus range achieved. Use the arrow marks on the sides to
ne-tune the focus if you are not satised with the results.
You may still need to use the ar-
row marks to ne-tune the focus depending on the live image on your screen. “>” means moving
from wide to tele end; and “<” tele to wide.
You can try the Snapshot focus function (in Applications > Package management)
when applied in the above mentioned scenario.
To Next Page
Loading...
Need help?
General
