Vivotek IB8381 - Page 171

VIVOTEK
User's Manual - 171
0: support only
/cgi-bin/viewer/camctrl.c
gi
transmission_mode Tx,
Rx,
Both
Tx 0/7 Indicate transmission
mode of the machine: TX
= server, Rx = receiver
box, Both = DVR.
network_wire <boolean> 1 0/7 Indicate whether to
support Ethernet.
network_wireless <boolean> 0 0/7 Indicate whether to
support wireless.
wireless_s802dot11b <boolean> 0 0/7 Indicate whether to
support wireless
802.11b+.
wireless_s802dot11g <boolean> 0 0/7 Indicate whether to
support wireless 802.11g.
wireless_s802dot11n <boolean> 0 0/7 Indicate whether to
support wireless 802.11n.
wireless_beginchannel 1 ~ 14 N/A 0/7 Indicate the begin
channel of wireless
network
wireless_endchannel 1 ~ 14 N/A 0/7 Indicate the end channel
of wireless network
wireless_encrypt_wep <boolean> 0 0/7 Indicate whether to
support wireless WEP.
wireless_encrypt_wpa <boolean> 0 0/7 Indicate whether to
support wireless WPA.
wireless_encrypt_wpa2 <boolean> 0 0/7 Indicate whether to
support wireless WPA2.
localstorage_manageable <boolean> 1 0/7 Indicate whether
manageable local storage
is supported.
localstorage_seamless <boolean> 1 0/7 Indicate whether
seamless recording is
supported.
localstorage_modnum 0,
<positive
integer>
4 0/7 The maximum MOD
connection numbers.
localstorage_slconnum 0,
<positive
1 0/7 The maximum seamless
connection number.