VIVOTEK
User's Manual - 59
Click the stream setting to display the detailed information. The maximum frame size will follow
your settings in the above Viewing Window sections.
This Network Camera offers real-time H.264 and MJEPG compression standards (Dual Codec) for
real-time viewing. If the H.264 mode is selected, the video is streamed via RTSP protocol. There
are several parameters for you to adjust the video performance:
■ Frame size
You can congure different video resolutions for different viewing devices. For example, set a
smaller frame size and lower bit rate for remote viewing on mobile phones and a larger video
size and a higher bit rate for live viewing on web browsers. Note that a larger frame size takes
up more bandwidth.
■ Maximum frame rate
This limits the maximum refresh frame rate per second. Set the frame rate higher for smoother
video quality and for recognizing moving objects in the eld of view.
The frame rates are selectable at 1fps, 2fps, 3fps, 5fps, 8fps, 10fps, 15fps, 20fps, and 25fps. If
the power line frequency is set to 60Hz, the frame rates are selectable at 1fps, 2fps, 3fps, 5fps,
8fps, 10fps, 15fps, 20fps, and 25fps. If you selected the 1080P mode in the FOV page and the
60Hz power line frequency is selected, you can configure frame rate to 30fps. You can also
select Customize and manually enter a value.
To Next Page
Loading...
