Group: upnpportforwarding
NAME VALUE SECURITY
(get/set)
DESCRIPTION
enable <boolean> 6/6 Enable or disable the UPNP port forwarding
service.
upnpnatstatus 0~3 6/7 The status of UpnP port forwarding, used
internally.
0 is OK, 1 is FAIL, 2 is no IGD router, 3 is no need
to do port forwarding
Group: syslog
NAME VALUE SECURITY
(get/set)
DESCRIPTION
enableremotelog <boolean> 6/6 enable remote log
serverip <IP address> 6/6 Log server IP address
serverport 514, 1025~65535 6/6 Server port used for log
level 0~7 6/6 The levels to distinguish the importance of
information.
0: LOG_EMERG
1: LOG_ALERT
2: LOG_CRIT
3: LOG_ERR
4: LOG_WARNING
5: LOG_NOTICE
6: LOG_INFO
7: LOG_DEBUG
Group: camctrl_c<0~(n-1)> for n channel product (capability.ptzenabled)
NAME VALUE SECURITY
(get/set)
DESCRIPTION
panspeed -5 ~ 5 1/4 Pan speed
tiltspeed -5 ~ 5 1/4 Tilt speed
zoomspeed -5 ~ 5 1/4 Zoom speed
focusspeed -5 ~ 5 1/4 Auto focus speed
patrolseq 0 ~ 64 1/4 Patrol sequence
patroldwelling 0 ~ 128 1/4 Patrol dwelling time
preset_i<0~19>_name string[40] 1/4 The name of preset location
preset_i<0~19>_dwelling 0 ~ 255 1/4 The dwelling time of each preset location
To Next Page
Loading...
