Vivotek IP8362 - Page 137

VIVOTEK
User's Manual - 137
night,
schedule
profile_i0_begintime hh:mm 4/4 Begin time of schedule mode.
profile_i0_endtime hh:mm 4/4 End time of schedule mode.
profile_i0_brightness -5~5 4/4 Adjust brightness of image according to mode settings.
profile_i0_saturation -5~5,100 4/4 Adjust saturation of image according to mode settings.
100 for saturation percentage mode.
profile_i0_saturation
percent
0~100 4/4 Adjust saturation value of percentage when
saturation=100
profile_i0_contrast -5 ~ 5 4/4 Adjust contrast of image according to mode settings.
profile_i0_sharpness -3~3,100 4/4 Adjust sharpness of image according to mode settings.
100 for sharpness percentage mode.
profile_i0_sharpness
percent
0~100 4/4 Adjust sharpness value of percentage when
sharpness=100
profile_i0_gammacu
rve
0~100 4/4 Gamma curve
profile_i0_lowlightm
ode
<boolean> 4/4 Enable/disable low light mode.
profile_i0_wdrcstren
gth
0~2 4/4 WDR enhanced
0: low
1: medium
2: high
profile_i0_wdrcmode 0~3 4/4 WDR enhanced
0: off
1: auto
2: always on
3:keep current value
7.12 Image setting for preview
Group: imagepreview_c<0~(n-1)> for n channel products
NAME VALUE SECURITY
(get/set)
DESCRIPTION
brightness -5~5 4/4 Adjust brightness of image according to mode settings.
saturation -5~5,100 4/4 Adjust saturation of image according to mode settings.
100 for saturation percentage mode.
saturationpercent 0~100 4/4 Adjust saturation value of percentage when
saturation=100
contrast -5 ~ 5 4/4 Adjust contrast of image according to mode settings.