To Next PageTo Next Page
Need help?Do you have a question about the Vivotek ND9322P-v2 and is the answer not in the manual?
General| Model | ND9322P-v2 |
|---|---|
| Category | Network Hardware |
| Type | NVR |
| Channels | 32 |
| Video Compression | H.265, H.264, MJPEG |
| Max. Recording Throughput | 320 Mbps |
| RAID | RAID 0, 1, 5, 10 |
| Hard Drive Bays | 4 |
| Video Output | HDMI, VGA |
| Audio Output | 1 x RCA |
| Storage | 4 x SATA HDD |
| Audio Compression | G.711, G.726 |
| Max. Hard Drive Capacity | 10 TB |
| Ethernet | 1 x RJ-45 10/100/1000 Mbps |
| USB Interface | 2x USB 2.0 |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Power Supply | 100-240V AC |
| Max. Recording Resolution | 12MP (4000x3000) |
Overview of VIVOTEK's NVR models, highlighting features like H.265, PoE, and VIVOCloud support.
Lists key hardware and software features of the NVR, including Linux OS, connectivity, and supported formats.
Details essential safety guidelines for installation and operation to prevent hazards and ensure proper use.
Provides physical dimensions and identifies front and rear panel components of the NVR unit.
Guides users through the physical installation process, including HDD mounting and cover removal.
Explains how to connect essential peripherals like monitors, Ethernet, USB devices, and power.
Outlines the steps for the initial setup and configuration using a connected monitor and input devices.
Introduces the NVR's local console interface, explaining navigation and basic controls.
Describes how to access the Configuration Portal and the Camera Portal for initial operations.
Details how to operate functions like PTZ, digital zoom, and playback within a camera view cell.
Explains the controls for Pan/Tilt, Zoom, Focus, and Presets for PTZ cameras.
Describes how to use the digital zoom feature to focus on specific areas within a live video feed.
Explains how to access and play back recorded video clips using a shortcut panel.
Shows how to view and manually trigger Digital Input/Output signals from connected cameras.
Covers functions like taking snapshots, manual recording, and returning to the LiveView window.
Details the context menu options available by right-clicking on a camera view cell.
Provides access to core functions like layout, DI/DO, search, export, and settings.
Explains how to select and manage different camera layout patterns for the display.
Shows how to view Digital Input/Output signals from cameras on the main portal.
Guides users on how to search for and retrieve recorded video footage based on various criteria.
Describes the fundamental method for searching recorded clips using a calendar interface.
Details how to search for recordings based on alarm events like motion detection or DI/DO triggers.
Explains how to search video clips associated with Point of Sale (POS) transactions.
Covers advanced search features utilizing metadata from Smart Motion detection and VCA.
Describes how to search for events detected by VCA analytics, such as line crossing or intrusion.
Explains how to use a storyboard interface for a visual timeline review of past recordings.
Guides users on selecting and exporting specific video segments to a USB drive.
Provides access to comprehensive configuration options for cameras and system parameters.
Presents an overview of camera connection and storage status, along with system control buttons.
Covers recruiting, disbanding, naming, binding, and configuring network settings for cameras.
Details how to configure pre/post-event recording times and other recording parameters.
Explains configuration for video streams, including auto adaptive stream and customized quality.
Covers adjusting display options like video name, timestamp, power line frequency, and video orientation.
Guides on setting up motion detection windows and sensitivity levels for cameras.
Details configuring PTZ preset positions and patrol sequences for compatible cameras.
Explains how to associate external ports with cameras for remote access via port forwarding.
Describes the process of updating camera firmware using a USB thumb drive.
Details setting up alarm triggers from camera inputs and defining corresponding actions.
Configures email server settings to send alarm messages with snapshots.
Allows changing system name, UI language, and configuring system time and time zone.
Covers firmware updates, device pack imports, system backup, and restore functions.
Configures display options like camera view rotation and resolution for 4K monitors.
Explains settings for graceful system shutdown based on UPS battery level.
Details how to view and search system logs categorized by System, Recording, User, Error, etc.
Provides access to VIVOCloud configuration for remote monitoring via mobile app.
Covers creating users, setting privileges, and defining camera access rights for different user groups.
Configures login requirements for live streaming and auto-logout behavior.
Displays volume information, disk status, and allows formatting or deleting storage volumes.
Explains options for configuring storage using single disks or RAID levels (RAID0, RAID1).
Guides on setting up automated backups to an FTP server with scheduling and bandwidth limits.
Covers configuring network type, IP address, subnet mask, default router, and DNS servers.
Details DHCP and manual IP setup for network connectivity.
Explains how to enable and configure Dynamic DNS (DDNS) for internet access.
Configures service ports for HTTP, RTSP, and CMS access, including VAST software integration.
Explains how to integrate a POS machine with the NVR for transaction data and video correlation.
Covers enabling and configuring Trend Micro security service for threat protection and virus database updates.
Shows the firmware version and device pack information for the NVR.
Details the process of logging into the NVR system via a web browser.
Explains how to access the NVR login page and recommended security practices.
Provides a breakdown of the Liveview interface elements and their functions.
Describes the camera list panel, including camera thumbnails, status, and sorting options.
Explains how to select, create, and save custom camera layouts for the Liveview screen.
Details functional buttons for clearing, full view, rotating layouts, and viewing DI/DO status.
Covers access to Liveview, Search, System Settings, system time, and logout functions.
Explains the components and modes of individual view cells displaying camera streams.
Details the PTZ controls for cameras with mechanical PTZ functions, including pan, tilt, zoom, and focus.
Describes how the alarm panel lists and displays camera alarms within the Liveview interface.
Details the graphical layout and screen elements for searching recorded video clips.
Explains the camera list panel used for searching recordings and accessing the calendar.
Covers available layouts (1x1, 2x2, 1+3) and synchronous playback controls in search mode.
Details the view cell components and functional buttons specific to the search recording clips interface.
Explains how alarms are displayed and filtered within the playback interface.
Describes how to use the calendar to navigate and view past recorded videos.
Covers the primary functions and controls within the Liveview interface.
Guides on arranging cameras within the Liveview layout and saving custom arrangements.
Details the operation of PTZ controls, zoom, focus, and other screen interaction elements.
Explains how to manage audio input from cameras, including volume, mute, and unmute functions.
Describes how to view camera properties and manually control recording or digital outputs.
Details how the Alarm panel displays and reports camera alarms within the Liveview interface.
Explains the buttons used for managing camera layouts, clearing cells, full view, and rotation.
Covers the process of searching and playing back recorded video clips.
Guides on selecting layouts, cameras, and using the calendar to find past recordings.
Explains how to view past alarms and retrieve video clips using bookmarks.
Details how to play back video clips from multiple cameras simultaneously at a specific point in time.
Guides on exporting video clips in various formats and lengths, such as EXE or 3GP.
Explains how to use the timeline slider and zoomer for precise time-based searching of recordings.
