To Next PageTo Next Page
Need help?Do you have a question about the Vivotek ND9541P and is the answer not in the manual?
General| PTZ control | Yes |
|---|---|
| Playback modes | Pause, Play, Speed Adjust, Stop |
| Internal memory | 256 MB |
| Number of users | 16 user(s) |
| Recording modes | Continuous, Event, Manual, Schedule |
| Maximum resolution | 2560 x 1920 pixels |
| Alarm input channels | 8 |
| Internal memory type | Flash |
| Throughput data rate | 96 Mbit/s |
| Video input channels | 32 channels |
| Alarm output channels | 4 |
| Supported resolutions | 2560 x 1920, 1920 x 1080, 1280 x 720, 720 x 480 |
| Audio formats supported | G.711, G.726 |
| Video formats supported | H.264, H.265, MPEG |
| Operating system installed | Embedded LINUX |
| Resolution at capture speed | 2560x1920@30fps, 720x480@960fps, 1280x720@240fps, 1920x1080@120fps |
| Minimum RAM | 4 GB |
| Browser supported | Internet Explorer 10 (32 bit) or above |
| Mobile operating systems supported | Android, iOS |
| HDD capacity | - GB |
| HDD interface | USB 3.2 Gen 1 (3.1 Gen 1) Type-A |
| Maximum storage capacity | 8 TB |
| Number of HDDs installed | - |
| Networking standards | IEEE 802.3af, IEEE 802.3at |
| USB 2.0 ports quantity | 2 |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Supported network protocols | IPv4, TCP/IP, HTTP, HTTPS, UPnP, RTSP/RTP/RTCP, SMTP, FTP, DHCP, NTP, DNS, DDNS, IP Filter |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 260 W |
| Power over Ethernet (PoE) power per port | 160 W |
| Certification | CE, LVD, FCC, VCCI, C-Tick, UL |
| Product color | Black |
| LED indicators | HDD, Network, Status, Y |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 0 - 95 % |
| Cables included | SATA |
Weight and Dimensions| Depth | 400 mm |
|---|---|
| Width | 430 mm |
| Height | 44.5 mm |
| Weight | 4500 g |
Overview of VIVOTEK's NVR system, its features, and capabilities.
Essential safety precautions for installing and operating the NVR.
Step-by-step guide for installing internal components like hard drives.
Instructions for installing the NVR system into a rack cabinet.
Overview of the NVR's main interface and navigation structure.
How to interact with individual camera feeds and controls.
Methods for searching and retrieving recorded video footage.
Camera-specific settings like motion detection and PTZ.
System-wide settings including network, user management, and PoE.
Steps for accessing the NVR system via web or local console.
Overview of the Liveview interface and its components.
How to manage camera layouts and PTZ controls in Liveview.
Operations for playing back and searching recorded video.
Details on system hardware, CPU, RAM, and storage.
Information on network interfaces, protocols, and PoE capabilities.
