EasyManuals Logo

Vivotek ND9541P User Manual

Vivotek ND9541P
216 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #207 background imageLoading...
Page #207 background image
VIVOTEK - Built with Reliability
User's Manual - 207
Note that the bookmarks you inserted on the Liveview window will be listed on the Alarm panel,
and the bookmarks will also appear on the slide bar of the Playback window.
To retrieve or view the video clip tagged by the bookmark, click on it to play the video that was
recorded by the time bookmark was inserted.
Bookmarks
6-2-3. Synchronous Playback
The NVR supports synchronous playback, which allows you to review video clips from up to 4
cameras at the same time. These video clips will be retrieved simultaneously all playing for a
specic point in time.
To perform synchronous playback:
1. Select a layout from the Layout panel, e.g., a 2x2 layout.
2. Click on the Synchronous playback
button.
3. Double-click to select a camera from the camera list. This camera becomes the Master
camera.
4. When the Calendar panel appears, click to select a date you prefer.
5. Click and drag other cameras from the camera list to the empty view cells. These cameras
will play back videos according to your operation on the Master camera.
1
2
Note the following when using the Synchronous playback:
1. Only the alarms triggered on the Master camera will be shown. In the Synchronous mode,
you can not nd the alarms or bookmarks generated for other cameras.
2. The playback speed, selection of video clips, and alarm playback of all cameras are made
synchronous.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vivotek ND9541P and is the answer not in the manual?

Vivotek ND9541P Specifications

General IconGeneral
PTZ controlYes
Playback modesPause, Play, Speed Adjust, Stop
Internal memory256 MB
Number of users16 user(s)
Recording modesContinuous, Event, Manual, Schedule
Maximum resolution2560 x 1920 pixels
Alarm input channels8
Internal memory typeFlash
Throughput data rate96 Mbit/s
Video input channels32 channels
Alarm output channels4
Supported resolutions2560 x 1920, 1920 x 1080, 1280 x 720, 720 x 480
Audio formats supportedG.711, G.726
Video formats supportedH.264, H.265, MPEG
Operating system installedEmbedded LINUX
Resolution at capture speed2560x1920@30fps, 720x480@960fps, 1280x720@240fps, 1920x1080@120fps
Minimum RAM4 GB
Browser supportedInternet Explorer 10 (32 bit) or above
Mobile operating systems supportedAndroid, iOS
HDD capacity- GB
HDD interfaceUSB 3.2 Gen 1 (3.1 Gen 1) Type-A
Maximum storage capacity8 TB
Number of HDDs installed-
Networking standardsIEEE 802.3af, IEEE 802.3at
USB 2.0 ports quantity2
Ethernet LAN data rates10, 100, 1000 Mbit/s
Supported network protocolsIPv4, TCP/IP, HTTP, HTTPS, UPnP, RTSP/RTP/RTCP, SMTP, FTP, DHCP, NTP, DNS, DDNS, IP Filter
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (max)260 W
Power over Ethernet (PoE) power per port160 W
CertificationCE, LVD, FCC, VCCI, C-Tick, UL
Product colorBlack
LED indicatorsHDD, Network, Status, Y
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)0 - 95 %
Cables includedSATA
Weight and Dimensions IconWeight and Dimensions
Depth400 mm
Width430 mm
Height44.5 mm
Weight4500 g

Related product manuals