Vivotek ND9541P - Settings - Camera - PTZ Settings

VIVOTEK - Built with Reliability
106 - User's Manual
To congure PTZ preset positions:
1. Select a PTZ camera by a single click.
2. Use the PTZ panel to move to a eld of view where you want to designate as a
preset position.
3. Click the add button, and enter a name for the position. Press Enter to proceed.
Repeat the conguration to create more positions.
4. Click the Apply button for the conguration to take e󰀨ect.
Note that the PTZ panel can vary with di󰀨erent PTZ cameras.
3-5-8. Settings - Camera - PTZ settings
1
2
3
4