Vivotek VC8101 - Page 176

VIVOTEK
176 - User's Manual
wireless WEP.
wireless_encrypt_wpa <boolean> 0 0/7 Indicate whether to support
wireless WPA.
wireless_encrypt_wpa2 <boolean> 0 0/7 Indicate whether to support
wireless WPA2.
derivative_brand <boolean> 1 0/7 Indicate whether to support the
upgrade function for the
derivative brand. For example, if
the value is true, the VVTK
product can be upgraded to
VVXX. (TCVV<->TCXX is
excepted)
npreset 0, <positive
integer>
20 0/7 Number of preset locations
eptz 0, <positive
integer>
<depend on
channel
configuration>
0/7 Bit 0~15 are the 1st group for
1st channel and bit 16~31 are
the 2nd group for 2nd channel.
Each bit in each group can be set
separately as follows:
Bit 0 => stream 1 supports ePTZ
or not.
Bit 1 => stream 2 supports ePTZ
or not.
The rest may be deduced by
analogy
fisheye 0, <positive
integer>
<depend on
channel
configuration>
0/7 A 32-bit integer, each bit can be
set separately as follows:
Bit 0 => channel 1 equipped
with fisheye lens.
Bit 1 => channel 2 equipped
with fisheye lens.
The rest may be deduced by
analogy
vadp 0, <positive
integer>
0 0/7 An 32-bit integer, each bit can
be set separately as follows:
Bit 0 => VADP interface
Bit 1 => Capture video raw data
Bit 2 => Support encode jpeg
Bit 3 => Capture audio raw data