Vivotek VC8101 - Page 175

VIVOTEK
User's Manual - 175
audio_headphoneout <boolean> 0 0/7 Indicate whether to support
headphone output.
audioin_codec <string> g711,g726 0/7 Available codec list for audio
input.
audioout_codec - - 0/7 Available codec list for SIP.
camctrl_httptunnel <boolean> 0 0/7 Indicate whether to support
httptunnel.
camctrl_privilege <boolean> 1 0/7 Indicate whether to support
“Manage Privilege” of PTZ
control in the Security page.
1: support both
/cgi-bin/camctrl/camctrl.cgi and
/cgi-bin/viewer/camctrl.cgi
0: support only
/cgi-bin/viewer/camctrl.cgi
uart_httptunnel <boolean> 0 0/7 Indicate whether to support
HTTP tunnel for UART transfer.
remotecamctrl_master 0, <positive
integer>
0 0/7 Indicate whether to support
remote auxiliary camera
(master side), this value means
supporting max number of
auxiliary camera.
remotecamctrl_slave <boolean> 0 0/7 Indicate whether to support
remote camera control (slave
side).
transmission_mode Tx,
Rx,
Both
Tx 0/7 Indicate transmission mode of
the machine: TX = server, Rx =
receiver box, Both = DVR.
network_wire <boolean> 1 0/7 Indicate whether to support
Ethernet.
network_wireless <boolean> 0 0/7 Indicate whether to support
wireless.
wireless_s802dot11b <boolean> 0 0/7 Indicate whether to support
wireless 802.11b+.
wireless_s802dot11g <boolean> 0 0/7 Indicate whether to support
wireless 802.11g.
wireless_s802dot11n <boolean> 0 0/7 Indicate whether to support
wireless 802.11n.
wireless_encrypt_wep <boolean> 0 0/7 Indicate whether to support