Vizio D48-D0 Quick Start Guide

HELP TOPICS
How do I return to the
Setup App?
• The on-screen menu has guided setup. Press MENU, then select Guided Setup. Select the type of setup
you need and press OK. The Setup App will begin.
• To reset the TV to factory defaults, press MENU > System > Reset & Admin > Reset TV to Factory
Defaults. If you have changed the default Parental Control Passcode, enter it now. Select Reset.
Remember that all of your settings will be lost.
There is a picture, but
there is no sound.
• Press the VOLUME UP button on the remote.
• Press the MUTE button on the remote to ensure that mute is o.
• Press MENU > Audio. Be sure TV Speakers is set to On.
• If you have an audio device connected to your TV, press MENU > Audio and set Volume Control to
External.
The TV displays
“No Signal.”
• Be sure your connected devices are turned on.
• Press the INPUT button on the remote and select the input to which your device is connected (HDMI-1,
HDMI-2, COMP, etc.).
There are black/gray
bars on the top/bottom/
sides of the screen.
• Note that some television channels add black bars to the picture.
• Set the TV to Wide or Zoom mode. Press the WIDE button, highlight Wide or Zoom, and press OK.
• Adjust the video settings of your external device
There is no power.
• Be sure the power cord is securely connected to the AC socket
on the TV and to a working electrical outlet.
• Press the POWER button on the remote or on the side of the TV.
• If the above steps do not work, try plugging the power cord into a dierent outlet.
The V.I.A. App is
not working.
• Be sure your TV is connected to the Internet.
• Restart the App by pressing the EXIT button to close the App, then open the App.
• Reboot your TV by pressing the POWER button on the remote, then turn it back on.
I am having trouble
connecting to
my network.
• If you are using an Ethernet cable, ensure it is securely connected to your router/modem and the TV.
• If you are connecting wirelessly, try repositioning your router for the best connection.
• Turn o all devices. Restart your router/modem.
• Try to use another internet-connected device. If it is not working, call your Internet Service Provider (ISP).
The remote is
not responding.
• Make sure the batteries are properly inserted, matching the - and + symbols.
• Replace the batteries with fresh ones.

Vizio D48-D0 Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	47.6 \
Display brightness	- cd/m²
Display technology	LED
Native aspect ratio	16:9
Native refresh rate	120 Hz
LED backlighting type	Full-Array
Supported video modes	1080p
Contrast ratio (dynamic)	2000000:1
Display number of colors	1.073 billion colors
Motion interpolation technology	-
3D	No
Number of OSD languages	3
On Screen Display (OSD) languages	ENG, ESP, FRE
Audio decoders	DTS
RMS rated power	20 W
Number of speakers	2
Product color	Black
Panel mounting interface	200 x 200 mm
DVI-D ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in	1
Remote control type	XRT122
Package depth	143 mm
Package width	1181.1 mm
Package height	752.86 mm
Package weight	15060 g
Power consumption (standby)	0.5 W
Power consumption (typical)	43.9 W

Weight and Dimensions

Depth (with stand)	248.92 mm
Width (with stand)	1087.12 mm
Height (with stand)	701.04 mm
Weight (with stand)	11385 g
Depth (without stand)	73.66 mm
Width (without stand)	1087.1 mm
Height (without stand)	640 mm
Weight (without stand)	11000 g