Vizio D65u-D2 User Manual

1
INSTALLING THE TV
After removing the TV from the box and inspecting the package
contents you can begin installing the TV. Your TV can be installed in
two ways:
• On a at surface, using the included stand
• On a wall, using a VESA-standard wall mount (not included)
Installing the TV Stand
Your TV includes a stand designed to support the weight of the TV
and keep it from falling over. However, the TV can still fall over if:
• It is placed on an uneven, unstable, or non-level surface
• It is pushed, pulled, or otherwise improperly moved
• If an earthquake occurs and the TV is not properly secured
Place the TV screen-down on a clean, at surface. To prevent
scratches or damage to the screen, place the TV on a soft surface,
such as carpet, rug, or blanket.
To install the stands:
1. Insert the stands into the base of the TV. 2. Secure each stand to the TV with two (2) Phillips screws (included).
Insert the screws into the back of the TV and tighten them using a
Phillips screwdriver.
3. When you are nished, place the TV on a stable, level surface.
It is recommended that two people take part in the
base installation.
8

Vizio D65u-D2 Specifications

General

Screen Type	led
Wall Mount	400mm x 400mm
Tuner	digital
Screen Size	65 inches
Refresh Rate	120hz
HDR	no
Built-In Speakers	yes
Surround Sound	dts studio sound
Speakers Output	15 watts
Number Of Speakers	2
USB Ports	1
RF Antenna	yes
Network	built-in wi-fi
Headphones Output	no
Digital Optical Audio Outputs	1
Analog Audio Outputs	1
Component Video Inputs	1
Composite Video Inputs	1
DVI	0
SmartTV	vizio internet apps (v.i.a.)
Remote Control	smart
3D	no
Power Consumption	143.98 kilowatt hours
Depth with Stand	10.24 inches
Height with Stand	35.77 inches
Width with Stand	57.42 inches
Net Weight with Stand	51.81 pounds
Depth without Stand	2.99 inches
Height without Stand	33.21 inches
Net Weight without Stand	51.15 pounds