1
4
1. It is recommended that two people take part in the base
installation.
Remove any plastic wrapping from the TV and the stand.
Place the TV screen-down on a clean, flat surface. To prevent
scratches or damage to the screen, place the TV on a soft
surface such as a blanket.
2. Align the base with the TV.
3. Insert and tighten the three(3) included hex screws into the
base with the included hex wrench.
4. Move the TV with attached stand into an upright position
and place on a flat, level, and stable surface.
5. To ensure proper ventilation, leave at least 1” of space
between the back of the TV and any other objects (walls,
etc).
To install the base:
BACK OF TV
To Next Page
Loading...
