5
40
Resetting the TV Settings
To reset the TV’s picture and audio settings:
1. Press the MENU button on the remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the remote to highlight the Help
icon and press OK. The Help menu is displayed.
3. Highlight Reset TV Settings and press OK. The TV displays,
“Are you sure you would like to Restore Defaults? This will
erase any custom settings.”
4. Highlight Yes and press OK.
5. Press the EXIT button on the remote.
Restoring the TV to Factory Default Settings
All of the on-screen menu settings can be reset to the factory
defaults.
If you restore the TV to the factory default settings, all
changes you have made to the settings will be lost!
To restore the TV to its factory default settings:
1. Press the MENU button on the remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the remote to highlight the Help
icon and press OK. The Help menu is displayed.
3. Highlight Clear Memory (Factory Default) and press OK.
4. Enter your parental control passcode. If you have not yet set
up a parental passcode, enter the default, 0000.
The TV displays, “Are you sure you would like to Restore
Defaults? This will erase any custom settings.”
5. Highlight Yes and press OK.
6. Wait for the TV to turn off. The TV will turn back on shortly
afterward and the Setup App will begin.
Performing a Service Check
When instructed by service personnel, you may need to perform
a Service Check. The Service Check is used as a troubleshooting
tool.
Only perform a Service Check when instructed to do
so by authorized service personnel.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
