Vizio E43-D2 Installation Guide

English - 30
FCC Class B Radio Interference Statement
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy, and if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Regulatory Information
Notice
The changes or modications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Shielded interface cables and AC power cord, if any, must be used in
order to comply with the emission limits.
The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modication to this equipment. It is the respon-
sibilities of the user to correct such interference.
FCC Warning
Changes or modications not expressly approved by the party
responsible for compliance with the FCC Rules could void the user’s
authority to operate this equipment.
Caution
Always use an AC/DC power adapter that is properly grounded.

Vizio E43-D2 Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	43 \
Display brightness	- cd/m²
Native aspect ratio	16:9
Native refresh rate	120 Hz
LED backlighting type	Full-Array
Supported video modes	1080p
Contrast ratio (dynamic)	2000000:1
Display number of colors	16.78 million colors
Motion interpolation technology	-
Processor cores	6
Ambient light sensor	Yes
Product color	Black
Panel mounting interface	200 x 200 mm
HDMI version	1.4
PC in (D-Sub)	No
HDMI ports quantity	3
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in	1
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	0
On Screen Display (OSD) languages	ENG, ESP, FRE
Battery type	AAA
Number of batteries supported	2
Audio decoders	DTS
RMS rated power	20 W
Sustainability certificates	ENERGY STAR
Power consumption (standby)	0.5 W
Power consumption (typical)	27.33 W
Remote control type	XRT133
Package depth	140.97 mm
Package width	1042.92 mm
Package height	690.12 mm
Package weight	12550 g

Weight and Dimensions

Depth (with stand)	209.04 mm
Width (with stand)	975.11 mm
Height (with stand)	623.32 mm
Weight (with stand)	9700 g
Depth (without stand)	86.11 mm
Height (without stand)	568.45 mm
Weight (without stand)	9530 g