3
24
Completing the First-Time Setup
The rst time you turn on the TV, the Setup App will guide you
through each of the steps necessary to get your TV ready for use.
Before you begin the rst-time setup:
• Your TV should be installed and the power cord should be
connected to an electrical outlet.
• Your devices should be connected.
• If you have a wireless network, have the wireless password
ready.
• If you are connecting to your network with an Ethernet
cable, connect it to the Ethernet port on the TV.
To complete the rst-time setup:
1. Press the Power button on the
remote. The TV powers on and
the Setup App starts.
2. Use the Arrow buttons on the
remote to highlight Home Use
and press OK.
3. Use the Arrow buttons on
the remote to highlight your
preferred language, and then
press the OK button.
4. Use the Arrow buttons on
the remote to highlight your
country, and then press the OK
button. Use the Arrow buttons
on the remote to highlight your
timezone, and then press the OK
button.
5. Use the Arrow buttons on the
remote to highlight your wireless
network in the list of available
networks and press OK.
Type the wireless password
using the on-screen keyboard,
then highlight Connect and
press OK.
6. Use the Arrow and OK buttons
on the remote to read and
accept the Terms and Conditions
and the Privacy Policy. When you
are nished, highlight I Accept
and press OK.
7. Type your E-mail Address, First
Name, Last Name, and ZIP Code
using the on-screen keyboard.
Highlight Next and press OK.
To Next Page
Loading...
Need help?
General
