Vizio E55-E1 User Manual

3
Note: The images shown here are for illustrative purposes only and may be subject to change. The actual on-screen image and text may vary, depending on the model.
Changing the On-Screen Menu Language
Your Display can display the on-screen menu in dierent languages.
To change the on-screen menu language:
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the
remote to highlight System and
press OK. The SYSTEM menu is
displayed.
3. Use the Arrow buttons on
the remote to highlight Menu
Language and press OK. The
MENU LANGUAGE menu is
displayed.
4. Highlight your preferred
language (English, Español, or
Français) and press OK.
5. Press the EXIT button on the
remote.
Menu Language
English
Español
Français
Back
Adjusting the Power Mode
Your Display is set to Eco Mode by default. When the Display is powered
o, Eco Mode setting uses less than 0.5W of power. Quick Start Mode
enables your Display to power on faster as well as automatically power
on when casting content.
Please note that by changing this setting the energy
consumption required to operate this device will
change.
To switch between Eco Mode and Quick Start Mode:
1. Press the MENU button on the remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the remote to highlight System and
press OK. The SYSTEM menu is displayed.
3. Use the Arrow buttons on the remote to highlight Power Mode
and press OK. The Power Mode menu is displayed.
4. Highlight either Eco Mode or Quick Start Mode and press OK to
select.
Adjusting the CEC Settings
The CEC function on your Display enables you to control
HDMI-connected devices with the included remote without any
additional programming.
Not all HDMI devices support CEC. See your device’s
user manual for details.
To enable, disable, or adjust CEC settings:
1. Press the MENU button on the remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the remote to highlight System and
press OK. The SYSTEM menu is displayed.
3. Use the Arrow buttons on the remote to highlight CEC and
press OK. The CEC menu is displayed.
4. Use the Arrow and OK buttons to adjust each setting:
• CEC - Select Enable to use the Display remote to control
CEC devices connected to HDMI. Select ARC Only for plug
and play of an audio device connected to the HDMI ARC
input. The ARC setting does not support video devices
connected to the audio device (Select Enable to enable
support for these devices). Select Disable to turn CEC o.
• Device Discovery - Use this function to determine if your
device is connected and supports CEC. (Required for Enable
option only.)
5. Press the EXIT button on the remote.
26

Vizio E55-E1 Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	55 \
Display brightness	- cd/m²
Display technology	LED
Native aspect ratio	16:9
LED backlighting type	Full-Array
Contrast ratio (dynamic)	5000000:1
Display refresh rates supported	120 Hz
Motion interpolation technology	-
Processor cores	8
Ambient light sensor	Yes
Video formats supported	H.265, VP9
Video compression formats	HEVC
Wi-Fi standards	Wi-Fi 5 (802.11ac)
HDMI version	1.4/2.0
HDMI ports quantity	4
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in	1
On Screen Display (OSD) languages	ENG, ESP, FRE
3D	No
Battery type	AAA
Audio decoders	DTS Studio Sound, DTS TruVolume
RMS rated power	10 W
Number of speakers	2
Power consumption (standby)	0.5 W
Power consumption (typical)	114.18 W
Product color	Black
Panel mounting interface	200 x 200 mm
Remote control type	XRT135 (ED) / XRT132
Package depth	195 mm
Package width	1382 mm
Package height	828 mm
Package weight	22389 g

Weight and Dimensions

Depth (with stand)	254 mm
Width (with stand)	1244 mm
Height (with stand)	776 mm
Weight (with stand)	15798 g
Depth (without stand)	78 mm
Height (without stand)	716 mm
Weight (without stand)	15449 g