Vizio E55-E1 User Manual

8
1
To mount your Display on a wall, you will need a wall mount. Consult
the information on this page to nd the appropriate mount for your
Display.
Be sure the mount you choose is capable of supporting the
weight of the Display. After you have determined that you have
the correct mount for your Display, you can begin the installation.
To install your Display on a wall:
1. Disconnect any cables connected to your Display.
2. Place the Display face-down on a clean, at, stable surface. Be sure the
surface is clear of debris that can scratch or damage the Display.
3. Remove the stands by loosening and removing the screws.
4. Attach your Display and wall mount to the wall, carefully following the
instructions that came with your mount. Use only with a UL-listed wall
mount bracket rated for the weight/load of this Display.
WALL-MOUNTING THE DISPLAY
Installing a Display on a wall requires lifting.
To prevent injury or damage to the Display,
ask someone to help you.
E55-E1 E55-E2 E60-E3 E65-E0 E65-E1 E70-E3 E75-E1 E75-E3 E80-E3
Screw Size: M6 M6 M6 M6 M6 M6 M8 M6 M6
Hole Pattern:
200 mm (V)
x 200 mm (H)
200 mm (V)
x 200 mm (H)
400 mm (V)
x 400 mm (H)
400 mm (V)
x 400 mm (H)
400 mm (V)
x 400 mm (H)
400 mm (V)
x 400 mm (H)
400 mm (V)
x 400 mm (H)
400 mm (V)
x 400 mm (H)
400 mm (V)
x 400 mm (H)
Weight w/o Stand:
26.68 lb
(12.10 kg)
34.39 lb
(15.60 kg)
43.65 lb
(19.8 kg)
50.72 lb
(23 kg)
50.72 lb
(23 kg)
56.88 lb
(25.8 kg)
77.16 lb
(35 kg)
62.83 lb
(28.5 kg)
31.97 lb
(14.90 kg)

Vizio E55-E1 Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	55 \
Display brightness	- cd/m²
Display technology	LED
Native aspect ratio	16:9
LED backlighting type	Full-Array
Contrast ratio (dynamic)	5000000:1
Display refresh rates supported	120 Hz
Motion interpolation technology	-
Processor cores	8
Ambient light sensor	Yes
Video formats supported	H.265, VP9
Video compression formats	HEVC
Wi-Fi standards	Wi-Fi 5 (802.11ac)
HDMI version	1.4/2.0
HDMI ports quantity	4
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in	1
On Screen Display (OSD) languages	ENG, ESP, FRE
3D	No
Battery type	AAA
Audio decoders	DTS Studio Sound, DTS TruVolume
RMS rated power	10 W
Number of speakers	2
Power consumption (standby)	0.5 W
Power consumption (typical)	114.18 W
Product color	Black
Panel mounting interface	200 x 200 mm
Remote control type	XRT135 (ED) / XRT132
Package depth	195 mm
Package width	1382 mm
Package height	828 mm
Package weight	22389 g

Weight and Dimensions

Depth (with stand)	254 mm
Width (with stand)	1244 mm
Height (with stand)	776 mm
Weight (with stand)	15798 g
Depth (without stand)	78 mm
Height (without stand)	716 mm
Weight (without stand)	15449 g