Vizio L37 - To Remove the Stand Base

www.VIZIOCE.com
Version- 10/5/05
8
VIZIO L37 HDTV User Manual
To remove the stand base:
1. Unplug all the cables and cords from your LCD TV.
2. Place the LCD TV face down on a soft and flat surface (blanket, foam,
cloth, etc) to prevent any damage to the display.
3. Remove the 6 screws on the back panel of the TV located near the bottom
so that the base stand can be removed. (see Figure 3.3a)
4. Gently pull the stand away from the display by grasping firmly to the base.
5. Now the display can fit securely to a mount (sold separately) by utilizing the
mounting holes in the center of the back panel of the display (see Figure
3.3b). Please make sure to read the directions of your specific wall mount to
properly hang the L37 HDTV. Make sure the wall mount is rated to support
at least 65 lbs.
To find the perfect mount for the VIZIO L37 HDTV,
browse VIZIO’s certified mount selection at www.vizioce.com
or call directly, 1-888-VIZIOCE (1-888-849-4623).
Fi gure 3. 3 b
Fi gure 3. 3 a