VIZIO M190MV/M220MV User Manual
8
www.VIZIO.com
Chapter 1 Setting Up Your HDTV
! Read this user manual carefully before installing your HDTV.
! The power consumption of your HDTV is about 37W (M190MV); 41W (M220MV) average.
Use the included power adapter. When an extension cord is required, use one with the
correct power rating. The AC/DC power adapter must be grounded and the grounding
feature must not be compromised.
! Install your HDTV on a flat surface to avoid tipping.
! For proper ventilation, you must allow a 1” space between the back of your HDTV and
the wall.
! Avoid installing your HDTV in places with high humidity, dust, or smoke so you do not
shorten the service life of the electronic components.
! Install your HDTV in a level, landscape orientation, with the VIZIO logo at the bottom to
prevent poor ventilation and excessive component damage.
! If you want to mount your HDTV on the wall, see below for additional information.
! Read this user manual carefully before installing your HDTV.
VIZIO offers professional installation services including home networking. Contact VIZIO for more
information on these services at 877-MYVIZIO (877-698-4946) or www.VIZIO.com.
Attaching the TV Stand
Unpack the TV and stand base:
1. Remove the remote control, batteries, base, and power adapter.
2. Remove the TV from the box and lay it face down on a clean, flat surface.
Note: Make sure that the surface is free of debris to prevent the TV screen from getting scratched.
Attach the TV stand base:
1. Push the stand base onto the stand neck (already connected to TV) making sure the
arrow on the base points toward the front of the TV.
2. On the bottom of the base, tighten the wing screw. Move the TV into an upright position.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
