4
17
The first time you turn on the TV, the Setup App will guide
you through each of the steps necessary to get your TV
ready for use.
Before you begin the first-time setup:
• Your TV should be installed and the power cord
should be connected to an electrical outlet.
• Your devices should be connected.
• If you have a wireless network, have the network
password ready.
• If you are connecting to your network with an
Ethernet cable, connect it to the Ethernet port on
the TV.
To complete the first-time setup:
1. Press the Power/Standby
button on the remote. The
TV powers on and the
Setup App starts.
2. Use the Left/Right Arrow
buttons on the remote to
highlight Home Use and
press OK.
3. Use the Up/Down Arrow
buttons on the remote to
highlight a language and
press OK. Then highlight a
country and press OK.
Completing the First-Time Setup
4 . Press and hold the red
Record button and Green
Hotkey button for 5 seconds
to pair the Wi-Fi Direct remote.
Use the Up/Down buttons on
the remote to highlight Begin
Activation and press OK.
When the remote has been
successfully activated, use
the Up/Down Arrow buttons
to highlight Connect to the
Internet and press OK.
5. Use the OK and Up/Down
Arrow buttons on the
remote to read and accept
the Terms of Service and
Privacy Policy for Yahoo! TV
Widgets.
When you are finished,
highlight Next and press
OK.
6. Select the name of your
wireless network from the
list of available networks
and press OK.
Enter the network password
using the on-screen
keyboard, then highlight
Connect and press OK.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
