Vizio PQ65-F1 User Manual

3
34
Restoring the TV to Factory Default Settings
All of the on-screen menu settings can be reset to the factory
defaults.
If you restore the TV to the factory default settings,
all changes you have made to the settings will be lost!
This includes any wireless or picture settings.
To restore the TV to its factory default settings:
1. Press the Menu button on the remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the remote to highlight System and
press OK. The SYSTEM menu is displayed.
3. Highlight Reset & Admin and press OK. The RESET & ADMIN
menu is displayed.
4. Highlight Reset to Factory Defaults and press OK. If you have
changed the set system PIN, enter it now.
The TV displays, “Select Reset to restore all TV settings to
factory defaults and clear all account information.”
5. Highlight Reset and press OK.
6. Wait for the TV to turn o. The TV will turn back on shortly
afterward and the Setup App will begin.
USING THE RESET & ADMIN MENU
You can use the TV’s RESET & ADMIN menu to restore the TV to its
factory default settings as well as access other system settings.
Using the RESET & ADMIN, you can:
• Reset the TV to factory
settings
• Force the system to power
o and on
• Turn the LED Power indicator
On or O
• Create a system pin code
to lock content and picture
settings
• Enable or Disable device
charging via the USB port
• Enable or disable program
oers and suggestions
• View the VIZIO privacy policy
• Start or stop the Store Demo
Mode
Reset & Admin
Reset to Factory Settings
Soft Power Cycle
Power Indicator On
System PIN Code
USB Power Always On
Viewing Data On
VIZIO Privacy Policy
Store Demo
Back
Turning the Power Indicator On or O
The Power Indicator on the front of your TV normally does not glow
when the TV is on. You can change this setting if you prefer the light
to be on.
To turn the Power Indicator Light On or O:
1. Press the Menu button on the remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the remote to highlight System and
press OK. The SYSTEM menu is displayed.
3. Use the Arrow buttons on the remote to highlight RESET &
ADMIN and press OK. The RESET & ADMIN menu is displayed.
4. Highlight Power Indicator and press OK.
5. Use the Up/Down Arrow buttons to select On or O, then
press OK.

Vizio PQ65-F1 Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	65 \
Display brightness	- cd/m²
Display technology	LED
Native aspect ratio	16:9
Native refresh rate	240 Hz
LED backlighting type	Full-Array
Contrast ratio (dynamic)	50000000:1
Display number of colors	1.073 billion colors
Display diagonal (metric)	163.83 cm
Motion interpolation technology	Clear Action 960
3D	No
Network streaming services supported	Vudu
Tuner type	Analog & digital
Video apps	Amazon Prime Video, Netflix
Operating system installed	SmartCast OS
RMS rated power	10 W
Number of speakers	2
Wi-Fi standards	Wi-Fi 5 (802.11ac)
Product color	Black, Silver
Panel mounting interface	400 x 400 mm
HDMI ports quantity	5
DVI-D ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
Number of OSD languages	3
On Screen Display (OSD) languages	ENG, ESP, FRE
Power consumption (standby)	0.5 W
Power consumption (typical)	240 W
Package depth	206 mm
Package width	1644.9 mm
Package height	978.9 mm
Package weight	39970 g

Weight and Dimensions

Depth (with stand)	300 mm
Height (with stand)	891.8 mm
Weight (with stand)	24900 g
Depth (without stand)	69.1 mm
Width (without stand)	1446.8 mm
Height (without stand)	831.1 mm
Weight (without stand)	24520 g