11
ATTACHING A VIZIO SOUNDBAR TO THE DUALHEIGHT STAND
The dual-purpose stand lets you raise your TV to accommodate a VIZIO Soundbar
underneath, or to mount your soundbar directly to your wall-mounted TV for the
ultimate streamlined look and finish.
To attach to a traditionally mounted TV:
1. Place the TV face-down on a clean, flat, stable surface. Be sure the surface is
clear of debris that could scratch or damage the TV.
Use the included screws with the holes on the feet matching your desired height:
• Low Prole Mode: Use the bottom two screw holes. Using this mode with a
soundbar may cause the bottom of the TV screen to be blocked.
• Soundbar Mode: Use the top two screw holes. Using this mode will allow
the soundbar to sit beneath the TV without obstructing the view of the
screen.
2. After setting the mount to your desired Profile Mode, place your TV upright in
the desired location.
3. Rest your soundbar centered between the mount feet.
Soundbar Mode
Low Prole Mode
Dual-Height Adjustable Stand
OR
Low-Prole ModeSoundbar Mode
These arrows should be facing
down/towards the screen.
To Next Page
Loading...
Need help?
General
