10
3
Changing the Picture Aspect Ratio
To change the screen aspect ratio:
Menu > Picture > Aspect Ratio
Use the Navigation buttons to highlight the aspect ratio you wish to view.
Your TV can display images in different modes:
• Normal (default) — No change to aspect ratio.
• Panoramic
*
— Stretches a 4:3 image to fill 16:9 screen with an algorithm so the
center doesn’t look stretched.
• Wide — Stretches a 4:3 aspect ratio to fill 16:9 screen. If a 16:9 image, adds
black bars to top and bottom.
• Zoom — Expands image both horizontally and vertically by 14%.
• Stretch
*
— When the 16:9 signal is a 4:3 image with black bars left and right,
stretches to fill the screen.
Some programs have black bars on the top or sides of the screen so that the
picture keeps its original shape. Examples include widescreen movies and older TV
programs.
Normal
Stretch Wide Zoom
TIP: The aspect ratio cannot be changed for Ultra
HD content or HDR content.
Adjusting Advanced Picture Settings
To adjust advanced picture settings:
Menu > Picture > Advanced Picture
Use the Navigation buttons to highlight the setting you wish to adjust, then press
the Left/Right Navigation buttons to change the setting:
• Black Detail — Adjusts the average
brightness of the picture to compensate for
Advanced Picture
large areas of brightness.
Black Detail Off
• Super Resolution — Configures the
Super Resolution Medium
resolution to enhance dim and blurred
Edge Enhancement Low
pictures resulting in a sharper image.
Local Contrast Low
• Edge Enhancement — Increases the
Backlight Control On
smoothness of edges.
Reduce Noise
• Local Contrast — Adjust the contrast of
Gaming Engine
the picture locally.
Film Mode On
• Backlight Control — Dynamically
Gamma
2.1 - Normal
improves the constrast ratio of the picture
Enhanced Viewing Angle
Off
by adjusting the backlight.
Color Calibration
• Reduce Noise:
− Signal Noise: Reduces background picture noise when viewing analog
sources. This function helps to correct "speckle" noise with a slight reduction
in sharpness.
− Block Noise: Reduces the side effects of digital compression such as
"blocking" and noise on sharp edges. The High setting will cause a slight
reduction in sharpness.
− Contour Smoothing: Removes visible contour noise without loss of the
complex detail.
• Gaming Engine:
− Game Low Latency: Reduces video delay (lag) when gaming. When set to
Auto and Automatic Low Latecy Mode (ALLM) is detected, ALLM will apply
for the duration of the game.
− Game HDR: Optimizes picture quality for HDR game.
• Film Mode — Optimizes the picture for watching films. Select On or O.
• Gamma — Set the shape of the Gamma curve. Use lower Gamma values for
bright room conditions, and higher values when it’s dark.
• Enhanced Viewing Angle
**
— Increases the viewing angle with richer colors and
a higher contrast image. This mode reduces horizontal resolution.
• Color Calibration — Calibrate colors using HSB, gain, offset and 20 point white
balance and test or reset colors to defaults.
**
Only available on V505-J09
*
Available aspect ratio settings may vary by input source. Panoramic mode is only available for standard
definition TV (480i/480p) and Stretch mode is only available for high definition TV (720p/1080i/1080p).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
