VIZIO VX32L HDTV20A User Manual
Version 5/20/2008
www.VIZIO.com
29
b. The Tuner screen will be
displayed; default choice is
Antenna. If you are using Cable
(No Box) Service, press the
button on the remote control to
highlight CABLE.
Press the button on the remote
to go to the next screen.
c. The Channel Scan screen will be
displayed; default choice is Scan.
Press the button on the
remote control to commence the
search for available channels to
be stored into memory.
If you do not want to scan for
channels at this time, press the
LAST key on the remote control.
Note: If you select to skip this step by pressing the LAST key, next time that you decide to complete this
procedure; you will need to select the TV as input (through the Input key) and then go through the Menu
option, and select the Tuner setup to get the option of scanning the channels again.
To Next Page
Loading...
Need help?
General
