VIZIO VX32L HDTV20A User Manual
Version 5/20/2008
www.VIZIO.com
15
2.2 Connecting Coaxial (RF)
2.2.1 Using Your Antenna or Digital Cable for DTV /TV
1. Turn off the power to the HDTV.
2. Connect the coaxial (RF) connector from your antenna or digital
cable (out-of-the-wall, not from the Cable Box) to the DTV/TV
CABLE/ANTENNA connector.
3. Turn on the power to the HDTV.
4. Select DTV using the INPUT button on the remote or side of the
HDTV, or directly by pressing the TV button on the Remote Control.
2.2.2 Using the Antenna or Cable through your VCR
1. Turn off the power to the HDTV and VCR.
2. Connect the “Output to TV”, “RF Out” or “Antenna Out” connector
on the rear of your VCR to the DTV/TV CABLE/ANTENNA
connector at the rear of the HDTV.
3. Turn on the power to the HDTV and VCR.
4. Select TV using the INPUT button on the remote or side of the
HDTV, or directly by pressing the TV button on the Remote
Control.
Note:
a) Not all digital TV broadcasts are High Definition (HD). Refer to the
program guides, or consult your cable, satellite or TV station operator.
b) Digital broadcasts are not available in all areas. Refer to
1Hwww.antennaweb.org
for detailed information.
c) Make sure the antenna and coaxial cable are correctly grounded.
d) For Professional antenna installation contact us at 2Hwww.VIZIO.com
or
call 1-888-VIZIOCE (1-888-849-4623).
Note: If you have an off-air antenna or cable TV, connect
it to the “Antenna In” connector on the rear of your VCR.
To Next Page
Loading...
Need help?
General
