To Next Page
S
Stephanie AdamsJul 31, 2025
What to do if my Vmed Technology Blood Pressure Monitor cannot detect signal?
- SStephen WrightJul 31, 2025
If your Vmed Technology Blood Pressure Monitor cannot detect a signal, first ensure the patient is in optimum condition by warming and extending the limb, delaying vasoconstrictive drug administration, clipping hair, wetting the area with alcohol, and repositioning the sensor. Also, try increasing or decreasing thumb pressure on the sensor, fully charging the battery, and checking the volume controls. Inspect the sensor and cable for damage. If the issue persists, it may be due to defective electronics.
General