SeatIng and Securement
13
WARNING
Failure to ensure seat is secured
to the vehicle oor may result in
serious bodily injury.
4. Step on wheel retraction lever to raise
the rear wheels. The rear seat base
latches will drop onto and engage the
rear securement brackets.
5. Grasp the seat at the top of the seat
back, pull back, and push forward to
ensure the seat base has locked to the
oor anchors.
6. Align the yellow dot on the plug to the
12:00 position. Insert the seat base
plug into the connector outlet and twist
the outer ring clockwise until it locks.
WARNING
Failure to reconnect seat base
plug into the connector outlet
will result in an inoperative
power seat and a non-functional
seat airbag.
To Next Page
Loading...
